Email:info@ballmillxg.com

Tel: 0086-371-64158222

 Contacts: Damon

 Tel: 0086-371-64158222

  E-mail: info@ballmillxg.com

  Address: Economic and Ecological Park of zhengzhou, gongyi city, henan province, China.

  • Shaking Table
  • Shaking Table

Shaking Table

  • Processing ability: 10–60 t/h
  • Feeding size: 0.15–2 mm
  • Feeding thickness: 15–30%
  • Applied material: tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, titanium, manganese, iron ore, coal, etc.

We're here to help: Easy ways to get the answers you need.


Shaking Table

Introduction :

In the metallurgical industry, shaker table is mineral processing equipment used for sorting fine material. Traditional single-layer shaker table covers large area and has low capacity. The launch of double-layer shaker table solves available problems in the use of single-layer shaker table. Double-layer shaker table has the features of small footprint, large capacity and relatively low cost, energy saving, high separation efficiency, easy to adjust, etc.
Working Principle : 
Shaking table (shake table) is one of the important dressing equipment depending on the gravity. It is widely used in selection of Tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, iron, manganese, ferrotitanium and coal. The raw materials on the shaking table are with mixed densities, the suspending particles of the materials will leak down from the shaking table for its bearing the larger force. When the shaking table works, the raw materials on the table will tumbling and sliding with the table concentrator. The different speed of the particles will lead the table expanding, then the particles with smaller size will screening out. The raw mineral materials will be selecting by adjusting the speed of the table.

Please Fill Your Contact Information