Email:info@ballmillxg.com

Tel: 0086-371-64158222

 Contacts: Damon

 Tel: 0086-371-64158222

  E-mail: info@ballmillxg.com

  Address: Economic and Ecological Park of zhengzhou, gongyi city, henan province, China.

  • Flotation machine
  • Flotation machine
  • Flotation machine
  • Flotation machine
  • Flotation machine

Flotation machine

  • Effective volume: 0.37-24m3
  • Processing capacity: 0.2-24m3/min
  • Processed materials: non-ferrous and ferrous metals (copper, zinc, lead, nickel, gold, manganese, titanic iron ore, apatite, etc), non-metals (fluorite and talc), etc.
  • Applications: The machine can be used to separate nonferrous metal, ferrous metal, noble metal, nonmetallic mine, chemical material and recycle mine.

We're here to help: Easy ways to get the answers you need.



Introduction :
The flotation machine is suitable to the selection of non-ferrous and ferrous metal, which also can be applied in non-metal such as coal fluorite and talc sorting. The flotation cell is driven by a motor triangular substituting transmission when impeller rotates, which can form the pressure of centrifugal effect, and on the one hand, suction sufficient air is mixed with the slurry, on the other hand, to stir the slurry mixed with the drug is the second step while refinement of the foam, so that mineral above adhesive foam float to the pulp surface mineralized foam is formed.

Working principle:
After coal and potions fully mixing,they will put into the under slot of first room, after the impeller rotating, it formed negative pressure in the cavity, made under the tank and the trough’s pulp put into the mixing zone separately by the impeller’s under suction and up suction. also can make the air into the mixing zone through along the sleeve, pulp, air and pharmacy mixed here. under the effect of centrifugal impeller, the mixed pulp put into the mineralized zone, the air formed bubbles and crushed. and full contact with the coal particles, then formed to mineralized bubbles, under the effect of stator plate and turbulence, evenly distributed in the trough of body section, and move up into the separation zone, enrichment formed bubble- layer, it will put out by bubble blowing machine, formed coal bubble. the un-mineralization coal particles up in the bottom of the trough will mix, mineralize and separate with second time through the circle hole and the suction hole. in the bottom of the trough, part pulp which is not in drafted by impeller, they will through by middlings box -buried in the ore pulp into the bottom trough of second room. Finish the full process of the first room. then go to the third room, such a cycle floater, the pulp through the last room into the tailings box, then put out the final tailings. 

Please Fill Your Contact Information